Universal Serial Bus Revision 3.1 Specification
Source: ShenZhen Maker-times Technology Co,.Ltd. Date: 2016.07.26 Clicks:
Read from http://www.usb.org/developers/docs/
USB 3.1 Specification
Universal Serial Bus Revision 3.1 Specification (.zip file format, size 57.2 MB) provides the technical details to understand USB 3.1
requirements and design USB 3.1 compatible products. Modifications to the USB 3.1 specification are made through Engineering
Change Notices (ECNs). Enclosed in this zip file are the following documents:
The USB 3.1 Specification released on July 26, 2013 and ECNs approved through March 1, 2016
USB 3.1 Appendix E: Repeaters
USB 3.0 Adopters Agreement
On-The-Go and Embedded Host Supplement to the USB Revision 3.0 Specification Revision 1.1 as of May 10, 2012
Inter-Chip Supplement to the USB Revision 3.0 Specification, Revision 1.02 as of May 19, 2014
USB 3.1 Device Class Specification for Debug Devices as of July 14, 2015
USB Type-CTM Port Controller Interface Specification as of October 20, 2015
USB Type-CTM Locking Connector Specification, March 9, 2016
USB Type-CTM Cable and Connector Specification Revision 1.2, March 25, 2016
USB Power Delivery Specification Rev. 2.0, Version 1.2, March 25, 2016 and corresponding Adopters Agreement
USB Authentication Specification Rev. 1.0, March 25, 2016
LIMITED COPYRIGHT LICENSE
The USB 3.0 Promoters grant a conditional copyright license under the copyrights embodied in the USB Type-CTM Cable and Connector
Specification to use and reproduce the Specification for the sole purpose of, and solely to the extent necessary for, evaluating whether to
implement the Specification in products that would comply with the specification. Without limiting the foregoing, use of the Specification
for the purpose of filing or modifying any patent application to target the Specification or USB compliant products is not authorized.
Except for this express copyright license, no other rights or licenses are granted, including without limitation any patent licenses.
In order to obtain any additional intellectual property licenses or licensing commitments associated with the Specification a party
must execute the USB 3.0 Adopters Agreement. NOTE: By using the Specification, you accept these license terms on your own behalf and,
in the case where you are doing this as an employee, on behalf of your employer.
THIS SPECIFICATION IS PROVIDED "AS IS" AND WITHOUT ANY WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED. WITHOUT LIMITATION,
THERE IS NO WARRANTY OF NON-INFRINGEMENT, NO WARRANTY OF MERCHANTABILITY, AND NO WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE. ALL WARRANTIES ARE EXPRESSLY DISCLAIMED.
USER ASSUMES THE FULL RISK OF USING THIS SPECIFICATION. IN NO EVENT SHALL USB-IF
OR THE USB 3.0 PROMOTERS BE LIABLE FOR ANY ACTUAL, DIRECT, INDIRECT, PUNITIVE, OR CONSEQUENTIAL DAMAGES ARISING
FROM SUCH USE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
USB 3.0 Adopters Agreement
USB 3.0 Adopters Agreement (.pdf file format, size 32k)
The USB 3.0 Adopters Agreement allows a signing company to participate in a reciprocal, royalty-free licensing arrangement for compliant
products. This agreement applies to both the USB 3.0 and USB 3.1 specifications, including USB Power Delivery and USB Type-CTM Cable
and Connector specifications. Any USB 3.0 Adopters Agreement shall only be effective if received within one (1) year after first sale of products
that include 'Compliant Products'. See the USB 3.0 Adopters Agreement for details.
Archived USB Specifications can be found here.
Intellectual Property Rights Notices
This page contains links to a reproduction of letters received by the USB-IF from patent owners asserting intellectual property rights that may
be pertinent to the implementation of a USB specification. For specific information regarding the licensing of intellectual property rights arising
from a particular USB Specification, the reader should consult the appropriate USB Adopters Agreement for that specification.
Notice to all readers: The USB-IF is providing this information as a courtesy to our members 'AS IS' and without warranty of any kind. The
USB-IF is not responsible for content of the individual postings. The USB-IF will not be responsible for identifying patents for which a license may
be required by a USB Specification nor for conducting inquiries into the legal validity or scope of those patents that are brought to its attention.
Please review the USB-IF Compliance Updates webpage frequently and subscribe to the news feed for the latest information regarding the
USB-IF Compliance Program.